Skip to main content
Contact

THE GUARANTEE OF AN IRREPROACHABLE PRODUCT.

WHY INSTALL SPIGO?

SPIGO GROUP Soluciones en madera - Signature Spanish Wood
SPIGO GROUP Soluciones en madera - SP

If you choose SPIGOGROUP, you will have the warranty to have the quality of an irreproachable service in wood ceiling installation
Professionalism, technical know-how and monitoring to solve in the best way any enquiry of our installers are our basic principles.

Furthermore you will benefit from a large number of advantages of a firm with unique personality and important standing.

1º

All of our products help to create the best work conditions for the installers.

1º

The characteristics and assembly of our products offer the best conditions to the transport, handling and storage.

2º

all our technical capacity to detect the best solution. We are flexible and feel very comfortable with creative solutions, far from the conventional.

3º

The measurements of acoustic panels and their profiles are standard. This facilitates the method of installation and the visual homogeneity results perfect.

4º

Spigogroup’s products are according to the current rules and certifications, which guarantee the quality of our products.

5º

SPIGOGROUP purpose the best quality-price ratio. The finishes are perfect and the result is impeccable.

PROFESSIONALS WHO OFFER
A PROFESSIONAL SERVICE

ALREADY INSTALLED SPIGO?

SPIGO GROUP Soluciones en madera - Signature Spanish Wood
SPIGO GROUP Soluciones en madera - SP

To ensure that you can carry out your work activity correctly, we remind you of the general conditions for storage, installation, final usage, manufacturing tolerances, variation in finishes, maintenance, and cleaning.

AND ALSO FOR

  • The material should be unpacked immediately before installation. The material should be unpacked immediately before installation. The original packaging is designed for indoor storage only and does not protect the material from rain, humidity, impacts…
  • Installation should be done only when the temperature and humidity of the site approximate the indoor conditions that will exist when the building is occupied.
  • The temperature is recommended to be at a constant value between 18ºC and 30ºC, avoiding sudden changes.
  • The RH of the air is recommended to be at a constant value of not more than 65%, avoiding sudden changes.
  • The original packaging does not protect the material from rain, humidity, impacts, etc., so covered storage is required. These products are not conceived to bear loads. No load or weight, of any kind (lighting, electrical wiring, HVAC, pictures or posters…), must be placed on the materials.
  • The materials are suitable for indoor storage, installation, and usage only, unless written agreement otherwise.
  • Cleaning should be carried out with a damp cloth. Never use abrasive or silicon-based products.
  • Elements such as open windows, heating, air conditioning, etc... affect the material and can cause the boards to contract and/or expand if conditions are not stable. These effects of the material and its possible falls, separations, etc... are not the responsibility of the manufacturing company but a physical-mechanical characteristic of the material itself.
  • Tolerances on dimensions per panel as measured upon manufacturing at our factory may vary by +/- 0.4% in both length and width, depending to the particular MDF board used. These variations may not be homogeneous across all plates; different variations may occur between plates.
  • Fire-retardant and moisture resistant MDF boards can show red and green tonalities due to the components used to lend these characteristics to the boards and cannot constitute a defect in the material.
  • In standard environmental conditions, an expansion joint of 1-2 mm per each meter of the installed material must be kept, to cover for normal expansion or contraction of the materials. For non-standard environmental conditions, other solutions may be available upon written agreement from Spigogroup’s Technical Department.
  • In the case of suspended ceiling installations with concealed profile grid, and due to physical-mechanical movements caused by changes in temperature or humidity, small rises or differences in height between adjacent panels may occur. In this case, it is recommended that the panels that produce these visual inequalities are shimmed with spacer(s), without this constituting a defect in the material.
  • For natural wood veneer finishes only: wood being a natural material, small differences in hue or grain are inherent to this material and cannot constitute a defect in the material.
  • For metallic melamine/HPL finishes and lacquered finishes: artificial lighting incidence or type, especially LED lighting, can result in apparent hue differences between adjacent panels. Differences in hue or finish must be assessed in natural lighting only.
  • Wood being a natural material, small differences in hue or grain are inherent to this material and cannot constitute a defect in the material.
  • Tolerances in length for Spigoline and Spigoplank products are +/- 3 mm.
  • For Spigoline panels, a lengthwise expansion and installation joint of 10 mm must be kept between ends of adjacent panels.

FOR INSTALLATION OF WOODEN CEILINGS

Do not hesitate to contact with our Technical Department: d.tecnico@spigogroup.com
Our business hours are Monday to Thursday from 7:00 a.m. to 3:00 p.m.. Friday from 7:00 a.m. to 2:00 p.m. .